Aluminum Floor Graphics feature a rugged 20 mil aluminum foil material designed to naturally conform to the texture of rough or smooth surfaces. The high-friction/slip-resistant surface improves the stability of pedestrian traffic in the area it is applied and is designed to withstand hot and cold weather conditions. This material exceeds anti-slip safety standards, both when wet and dry.

Aluminum Floor Graphics are printed directly on materials using UV cured inks, rendering it rated for outdoor use. Although this product is designed for outdoor use, harsh weather conditions and extreme traffic may wear down the slip-resistance and require the graphics to be replaced sooner for safety precautions. Indoor applications and locations with lighter pedestrian traffic can prolong the material’s lifespan.

Yes, this material can be used on fairly even, harder surfaces such as concrete, brick, epoxy, etc. For best results, we recommend using a hard rubber roller to roll on the surface of the material after application.

Yes, custom shapes can be requested through the estimating panel on our website.

UV cured inks are printed directly onto the surface of the aluminum panel, resulting in a longer outdoor lifespan.

Files must be submitted in PDF format, without crop marks. Text and graphics should be placed at least 0.5” from the edge of the cutline for safety. Ensure you have 0.5” bleed on all sides of your artwork.

Sweep your desired area clear of dirt, debris or moisture (if the surface is oily, it may need to be power washed with a commercial degreaser). Peel off the release liner from the floor graphic, lay flat on the surface and compress by hand with a roller. Make sure all edges are completely adhered. The high performance pressure-sensitive adhesive provides superior holding strength, enabling it to be ready for immediate use. It can be applied at temperatures of 33℉ / 0℃ or above. Please note, you MUST consider the temperature of the surface to which you’re applying. For instance, stone and metal surfaces are often colder than air temperature. It is ALWAYS recommended to test the application when the temperatures hover around freezing. For best results, it is recommended to apply your floor graphic in temperatures of 50℉ or above.

For maximum bonding results, we recommend using a hard rubber roller to roll on the surface of the material after application. The material can be used on fairly even, harder surfaces such as concrete, brick, epoxy, etc.

Yes, Aluminum Floor Graphics are made from aluminum and contain no PVC or hazardous elements. It can be disposed with aluminum recycling.